Environmentally Friendly High Quality Polylactic Acid Powder

Product information

Advantages of Polylactic Acid
1.Polylactic Acid(PLA) has its own unique characteristics in addition to the basic characteristics of biodegradable plastics. Traditional biodegradable plastics are not as strong, transparent, or resistant to climate change as conventional plastics.
2.Polylactic Acid(PLA) has similar basic physical properties to petrochemical synthetic plastics, which means that it can be used for a wide range of applications. PLA also has good gloss and transparency, comparable to films made from polystyrene, which is not available in other biodegradable products.
3.Polylactic Acid(PLA) has the best tensile strength and ductility, PLA can also be produced in a variety of common processing methods, such as: melt extrusion molding, injection molding, blown film molding, foam molding and vacuum molding, and a wide range of Polymers with similar molding conditions, in addition to the same printing properties as traditional film. In addition, it has the same printing properties as conventional films. In this way, PLA can be made into a wide variety of applications in response to the needs of different industries.
4.Polylactic Acid(PLA) film has good air permeability, oxygen permeability and carbon dioxide permeability, it also has the characteristic of isolation of odor. Viruses and molds are easy to attach to the surface of biodegradable plastics, so there are safety and health concerns, however, PLA is the only biodegradable plastic with excellent antibacterial and anti-mold properties.
5.when the incineration of Polylactic Acid(PLA), its combustion calorific value and incineration of paper, is the same as the incineration of traditional plastics (such as Polyethylene ), half of the incineration, and incineration of polylactic acid will not release nitrogen compounds, sulfur compounds and other toxic gases. The human body also contains lactic acid in monomer form, which indicates the safety of this decomposable product.
SPI Identification
The Society of Plastics Industry (SPI) has established a numerical identification code of "7" for Polylactic Acid (PLA). Recycling of Polylactic Acid has started in Belgium as a pilot country. The recycling of Polylactic Acid is not quite the same as for other polymers in that used PLA plastics are collected in special containers and degraded by pyrolysis, hydrolysis, etc. into small molecule monomers, which are then synthesized by the producer into PLA raw materials with a certain level of performance and reintroduced into the market.

Company information

The company's main import and export products include

(1)Rubber Products:Rubber products aging test belongs to the category of aging test, rubber aging refers to Rubber And Products in the processing, storage and use of the process, due to a combination of internal and external factors caused by the structure of the performance of the phenomenon caused by changes in the loss of use value. Expressed as cracking, sticky, hardening, softening, pulverization, discoloration, mold, etc..

(2) Intermediates ：The chemical compound synthesized from simpler compounds and usually intended to be used in later syntheses of more complex products.A usually short-lived chemical species formed in a reaction as an intermediate step between the starting material and the final product.

(3)Organic Raw Materials：The organic raw materials are Petrochemicals made of petroleum and natural gas, and the industries of various organic chemical products are produced or fractionated by the raw material gas after coal gasification and the coal tar recovered by dry distillation.Our Organic Raw Materials include Industrial Ethylene、Ester Compounds、Ether Compounds.